Screw Spindle-Counter OMG with ZED
0.1 - 10 l/min ... 50 - 5000 l/min liquid
1 - 1000000 mm²/s viskosity
Accuracy: ±0.1 % of span (1:100), ±0.3 % of span (1:150)
Connection: G ½ ...6 female thread, flange DN15 ...100
pmax: 420 bar
Output: 1x pulse
Electrical connection: right-angle plug, PTFE-cable,
cable box / 1 m PTFE-cable, PVC-cable
Power supply: 10 ... 30 VDC / 5 ... 25 VDC
Material: ductil iron, stainless steel
Option: analogue output, counter, dosing, digital display, relays, panel mounting
Pulsation-free principle of measurement, almost insensitive
to viscosity, minimum space requirements,
self-cleaning measuring chambers, choice of installation
The KOBOLD screw-type volumetric flow meter based on the principle of positive displacement was developed in response to the need to measure and control viscous media. It was specially designed to measure viscous media with non abrasive properties. Variations in viscosity in the range 1 to 5000 mm 2 /s have no effect on measurement results within the measuring accuracy.
The KOBOLD screw-type volumetric flow meter satisfies the stringent demands for greater accuracy, reliability and economic efficiency. Two spindles with cycloidal profiles form the basis of the screw-type volumetric flow meter. Spindles manufactured with extreme precision are supported at each end with a ball bearing. The axially forced measuring medium causes the spindles to rotate uniformly.
The rotary motion is picked off with inductive proximity sensors or Hall-effect sensors and converted to a frequency signal. An exact measurement of the delivered flow volume is obtained with the volumetrically defined measuring chambers. Combined with downstream evaluation electronics, the KOBOLD screw-type volumetric flow meter becomes a flexible measurement and control system for viscous media.