KOBOLD Instruments Inc • 1801 Parkway View Drive • 15205 Pittsburgh, PA • Tel: +1 412 788 2830 • E-mail: Please activate JavaScript visit koboldusa.com

epx-durchfluss.png: Eletromagnetic Flowmeter for hazardous areas EPX

Eletromagnetic Flowmeter for hazardous areas EPX

For conductive fluids

Measuring range:
0.05 ... 2717 m³/h
Accuracy: ±0,3 % of reading ±0,01% of Qmax
pmax: PN40
tmax: -35 ... +139°C
Connection: flange DN15 ... DN300, ANSI ½ ... 12"
Lining material: hard rubber, soft rubber, PTFE
Output: 4-20 mA, pulse, status
Communication: HART®
Approvals: ATEX (Gas/Staub)

Datasheet

application/pdf; charset=binary

epx-umf3-gb-flow

1,2 MB

Approvals

application/pdf; charset=binary

16_ATEX_0064U_en

1,6 MB
application/pdf; charset=binary

16_ATEX_0065X_en

1,6 MB

Function

The KOBOLD flowmeter EPX is used to measure and monitor the volume flow rate of fluids, pulps, pastes and other electrically conductive materials, without loss of pressure. When an electrically conductive medium passes through a directional magnetic field, a voltage is induced in accordance with Faraday’s Law of Induction. The size of this measurement voltage is proportional to the mean rate of flow and consequently also to the volume flow rate.

A flowmeter consists of a sensor that picks up the measuring signal generated from the induced voltage, and a transducer that converts this signal into a standardised output signal (4-20 mA or pulses). The measurement transducer can be affixed to the sensor or mounted separately. Pressure, temperature, density and viscosity do not affect the volume measurement. Solid fractions and gas bubbles should be avoided.

Other Members of the KOBOLD group

Products by Keyword
loading
loading