KOBOLD Instruments Inc • 1801 Parkway View Drive • 15205 Pittsburgh, PA • Tel: +1 412 788 2830 • E-mail: Please activate JavaScript visit koboldusa.com

dmh-durchfluss.png: Eletromagnetic Flowmeter DMH

Eletromagnetic Flowmeter DMH

For conductive fluids

Measuring range:
0.05 ... 40376 m³/h
Connection: flange DN10 ... DN1200, ANSI ½ ... 48"
Lining material: hard rubber, soft rubber, PTFE / PFA
pmax: PN40
Temperature range: -20 ... +150°C
Accuracy: ±0.3 % of reading ±0.01 % x Qmax
Output: pulse / analogue output, status display, totaliser, Hart®

Datasheet

application/pdf; charset=binary

dmh-gb-flow

594 KB

Description

The KOBOLD DMH flowmeter is used to measure and monitor the volume flow rate of fluids, pulps, pastes and other electrically conductive materials, without loss of pressure. When an electrically conductive medium passes through a directional magnetic field, a voltage is induced in accordance with Faraday’s Law of Induction. The size of this measurement voltage is proportional to the mean rate of flow and consequently also to the volume flow rate.
A flowmeter consists of a sensor that picks up the measuring signal generated from the induced voltage, and a transducer that converts this signal into a standardised output signal (4-20 mA or pulses). The measurement transducer can be affixed to the sensor or mounted separately. Pressure, temperature, density and viscosity do not affect the volume measurement. Solid fractions and gas bubbles should be avoided.

Other Members of the KOBOLD group

Products by Keyword
loading
loading