KOBOLD Instruments Canada Inc • 9A Aviation Avenue • Pointe Claire, QC H9R 4Z2 • Tel: +1/5144288090 • E-mail: Please activate JavaScript  visit koboldusa.com

kmt-durchfluss.png: Mass Flow Meter - Thermal KMT

Mass Flow Meter - Thermal KMT

For compressed air and gases

Measuring range:
0.32 - 63 Nm³/h ... 263.4 - 263 350 Nm³/h air
Connection:
G ½ ... G 2 with ball valve
½" ... 2" NPT with ball valve
R ½ screw-in version for DN65 ... DN700
Material: sensor: stainless steel, ball valve: brass
pmax: 16 bar
tmax: 80°C
Accuracy: ±1.5 % of reading +0.5 % of full scale
Output: 2 analogue outputs / switch  outputs / pulse outputs programmable for mass, volume, temperature, consumption
Option: digital indication

KMT-1/-2/-3
magnify

KMT-1/-2/-3

KMT-4
magnify

KMT-4

Datasheet

application/pdf; charset=binary

kmt-gb-flow

1,5 MB

Operating Instructions

application/pdf; charset=binary

KMT - Operating Instructions

6,3 MB

Miscellaneous

application/pdf; charset=binary

General Safety Instructions

175 KB

Downloads

application/zip; charset=binary

Software

Configuration software

7,8 MB

Description

The flowmeter of the series KMT, based on the measurement principle of thermal mass flow, is ideally suited for the measurement of flow of compressed air and gases in pipes with sizes from DN 15 ... DN 700. Measurement of for instance the usage of compressed air, nitrogen, CO2, O2 or other non-corrosive, non-flammable gases. The KMT is setting new standards in terms of measurement accuracy and reproducibility thanks to its application specific adjustment during production.
This flowmeter is adjusted under a pressure of 7 bar (abs) (DN 15 ... DN 50) or  9 bar (abs) (DN 65 ... DN 700). Adjusting the device specifically for its application has the advantage of keeping the actual flow speed in the pipeline low even with very large flow  quantities. Thanks to the more stable flow profile, this low flow speed facilitates a much better degree of reproducibility and accuracy than if the device were adjusted conventionally under normal pressure, as flow speeds up to 200 Nm/s can often no longer be controlled under conventional adjustment pressures.
The core design of the flowmeter is based on the hot film sensor element, which is produced  using the most modern thin film technology and has already proven itself time and time again in the automotive industry. This flow sensor features excellent long-term stability, a fast  response time and an extremely high degree of reliability. Two outputs are available, for further processing of the measurement data. Depending on the application, these outputs can be  configured as analogue (current or voltage), switch output or as pulse output for the measurement of the consumption.
The KMT has an integrated counter for consumption. The consumed  amount is shown on the display and the saved value is not lost even after power outage. The availability of the consumption amount as a free configurable pulse output is another helpful  feature.

Other Members of the KOBOLD group

Products by Keyword
KOBOLD Instruments Canada Inc.

9A Aviation Avenue / Pointe Claire
QC H9R 4Z2 Montreal
Canada

Please activate JavaScript

Cookies & Features

This website uses cookies to provide content and features. Details of the technologies used can be found in our privacy policy.

Essential Cookies

Session data such as language selection or spam protection - you can't do without it.

Google Services

Some pages on this website load content from Google Maps and YouTube.

loading
loading